Stroj na vstrekovanie živicových vlákien
Dodacie podmienky:EXW, FCA, FAS, FOB, CFR, CIF, CPT, CIP, DAT, DAP, DDP
Platba:30% záloha od T / T, zostatok pred odoslaním.
Lead time:do 10-35 dní po obdržaní zálohy.
Záruka:do jedného roka od dátumu B/L.
- Prehľad
- Parameter
- dotaz
- Súvisiace produkty
- The booster pump for resin is driven by pneumatic cylinder for high power, which is suitable for inflammable area.
- Two-component spray gun is designed for exterior mixing to avoid the possible jam inside.
- Storage tank for hardener with capacity five liters.
- Fiber cutting device is driven by compressed air, can cut single strandor double strands fibers.
The resin-fiber injection machine is used to apply the resin and fiber on work piece surface simultaneously. It is the modern technology to save resin consumption and labor cost compare to hand lay-up technology, which is widely used for FRP or GRP product in mass production.
Resin spraying capacity: | 3-6kg/min |
Booster pump ratio: | 18:01 |
Hardener adjustable range: | 0.8%-3% |
Pracovný tlak: | 0.3-0.7MPa |
Spotreba vzduchu: | 50-500 l / min |
Dĺžka hadice: | 8m or 20m for option |