Hydraulický polyurea / Pu striekací stroj
Dodacie podmienky:EXW, FCA, FAS, FOB, CFR, CIF, CPT, CIP, DAT, DAP, DDP
Platba:30% záloha od T / T, zostatok pred odoslaním.
Lead time:do 10-35 dní po obdržaní zálohy.
Záruka:do jedného roka od dátumu B/L.
- Prehľad
- Parameter
- dotaz
- Súvisiace produkty
- Horizontal-opposed both way proportioning pump adopt coaxial type design, to avoid the pressure discrepancy because of gravity. All the pump system equipped with pressure overload protection switch for emergency stop.
- The main machine heating system adopt independent all-aluminum heater, equipped with 8 pieces of high capacity heating bar for more powerful heating capacity, especially suitable for low temperature work in winter. The temperature controller equipped with display,measuring and over-heat protection device.
- Self-cleaning system The solvent tank installed on material A side, with continuous cleaning on measuring pump seal to avoid Isocyanate crystallization on bearing. The machine part life can be lengthen with less abrasion, also easy for maintenance.
- Pressure compensation To ensure the stable work pressure, we install the pressure compensation device inside hydraulic pump to get better mixing result.
- Hydraulic drive system The hydraulic system equipped with imported motor, pump as key parts. The additional radiator system is equipped to avoid the performance fault because of high oil temperature.
The hydraulic polyurea / pu spraying machine BDF-V is specially designed for polyurea elastomer product, which is widely used for wall, roof, refrigerator, tank body, pipeline protection coat for abrasive surface, waterproof, antiseptic purpose. The machine has accurate measuring, even mixing, portable and high performance advantage, especially suitable for sitework.
Model BDF-V |
Max. Flow capacity 2-8kg/min |
Mixing ratio 1:1, fixed ratio |
Material viscosity range 200-1000CPS (Operation temperature) |
Max. System pressure 25MPa |
Single material output press Max.26MPa |
Hydraulic pressure 8-12MPa (for working) |
Material heating capacity 9000W X 2 |
Hose heating capacity 3200W |
Max. Hose length 90M |
Electric system 38A x 3 + 16A -380V 3Phase |
Driven system Full-hydraulic |
Cleaning system Pneumatic cleaning |
Rozmer 1100x700x1400mm |